MAIN PHONE NUMBER: 602-866-8044 |
|
| Return to Engine Catalog Index Page |  |
|
 |
 |
NEW UPGRADES AVAILABLE:
CALL US FOR DETAILS! |
LET'S GO ROLLER!
ASK ABOUT OUR ROLLER CAM UPGRADE PACKAGES!
These engines
are built from our road proven and Dyno tested packages in our
shop. This is a very good street friendly engine with an Old
School sound.
Your specific engine can be Dyno tested individually for an additional
cost.
Also ask about Fast Track engine testing for your engine, which
is cheaper than Dyno testing!
These are some of the best street high performance engines out there when Dyno tested or Fast Tracked!
Special
features on this Turnkey engine include these:
(Be sure to scroll ALL the way down the page
to see a more detailed listing.)
- Howards or Comp Cam Kit (great old school sound!)
- SEAL POWER/Speed Pro heavy duty pistons
(piston application can vary depending upon horsepower) - STEEL FORGED RODS
(higher horsepower engines also include ARP bolt kit) - NODULAR CRANK Pro Turn Micro Polish
- Your choice of Edelbrock 600, 650 or 750 CFM electric choke
or Holley 600 to 750 CFM electric choke.
(some engines may require higher CFM carb) - Choice of 5 distributors:
Pertronix Stage 1 is included in price;
Pertronix Billet Stage 2 is extra;
Pro Street HEI distributor is included;
MSD 2 pack is extra;
MSD 6AL 3 pack is extra.
- Plugs, Plug wires. Call for colors!
- PER Pro 7" High Performance Harmonic Balancer
- Chrome valve covers, Chrome pulleys (for passenger side only, at extra cost. Fit only early 1970s and earlier)
- New chrome air cleaner included. Custom air cleaners extra.
- Water Pump and standard 5 qt oil pan included.
(Custom oil pans are available for an extra charge.) - New Satin Aluminum intake manifold,
plain (no name)
OR new Edelbrock aluminum intake manifold for a little extra.
Polished dual plane intake manifolds are extra. - New Aluminum Timing cover.
- This engine will run on 89 or 91 Premium unleaded fuel.
- Built based on one of our Dyno tested and road proven packages.
- Call for info on flex plate or fly wheel.
- Call for correct flex plate on automatics.
- Call for info on standard transmission flywheels (4 or 6 speed, etc.)
- Call for engine colors.
- Don't forget to call us for pricing on Fast Track Start up
and Break-in!
What
comes with your Power 2® engine?
Your Power
2®
ENGINE PARTS include:
- Power 2® Howards or Comp Cam Kit
(GREAT OLD SCHOOL SOUND!)
- Power 2® hydraulic lifters, Seal Power/Comp
- Power 2® spring set, heavy duty (940 series spring sets)
- Satin aluminum intake manifold.
(Polished or RPM dual plane intake manifold is extra.) - Heavy Duty Steel Stem intake valves
- Heavy Duty Steel Stem exhaust valves
- Premium positive valve seals, polyacrylate
- Heavy Duty roller timing chain
- Controlled internal oil system (a PER exclusive!)
- Heavy duty stock or high volume Melling oil pump
- Heavy duty Melling steel collar oil shaft
- Heavy duty oil pickup screen
- High quality American Speed Pro or Seal Power Heavy Duty pistons
- P.E.R.® Speed Pro plasma molly rings
- Brass freeze plug kit and oil gallery kit
- High quality rear main seal, double lip polyacrylate
- Fel Pro PermaTorque heavy duty gaskets and gasket set
- King or Clevite main bearings, Real Tri metal, high quality
- King or Clevite rod bearings, Real Tri metal, high quality
- New rod nuts installed
- Cam bearings, high quality 360 Set
Your Power 2®
MACHINE LABOR includes:
- P.E.R. 4-angle® valve job
- Mill-matching surfaced heads
- Heavy duty thick wall valve guides
- Valve guides custom cut for posi-seals
- Jet vat block and magnifluxing
- Remove and replace all freeze plugs
- Remove and replace gallery plugs
- Remove and replace cam bearings
- Custom centerline boring of block
True 90 degree V8 centerline boring - Power hone to fit pistons and rings
- Custom crank micro polish, radius oil holes
- Rods pressed off, then heat fitted
- Rods checked for alignment
- Street Balancing and blueprinting
SOME ASSEMBLY IS NEEDED.
These engines are built from our
Dyno tested and road proven packages in our shop.
Your specific engine can be Dyno tested individually for an additional cost.
Also ask about Fast Track engine testing for your engine, which is cheaper than
Dyno testing!
DID YOU KNOW? At Phoenix Engine, every Power Engine® is CUSTOM rebuilt in our machine shop by P.E.R. professionals, from start to finish. The Power Engine® Performance Combination was developed from our over 50 years of experience on MUSCLECARS, STREET STRIPS, CUSTOM TRUCKS, 4x4s, HOT RODS, CUSTOM MODS, JEEPS, and RESTORATIONS. Established in 1971, PhoenixEngine.com has built over 200,000 quality engines to date.
Warranty and Shipping Info:
This engine has a one year
written warranty. Buyer pays actual shipping costs if unable
to pick up engine from our shop in Phoenix AZ. Some state freight
restrictions apply. Payment due in full prior to shipping. We
accept Visa, Mastercard, Discover, American Express, money orders,
cashier's checks, and direct deposit. (GET
A DISCOUNT WITH A DIRECT DEPOSIT!) Business
or personal checks must clear prior to shipping. Arizona residents
must add 8.6% sales tax.
Please call for core requirements.
Call PhoenixEngine.com today to
order!
Telephone: 602-866-8044
Monday through Thursday: 8:30am - 5:00pm
Friday 08:30am - 4:00pm
Saturday: BY APPOINTMENT ONLY
Sunday: Closed
Times listed are Arizona time (-7 GMT).
Arizona does not observe Daylight Savings Time. We are on MST all year round.
Disclaimer: Please note that some parts
are based on availability. The brand names listed above are guidelines;
the exact brand name may not be available at the time we build
your engine. Pricing is deemed to be correct at time of posting,
but is not guaranteed. It is listed as a guideline only. Please
call us for complete pricing on the engine built to your specific
requirements.
Please be sure to read our full Disclaimer:
CLICK HERE.
5/18/24 orig
7/27/24
* Note: When we custom build your engine, you can choose from over 25 different colors or you can supply the paint to have your engine painted the same color as your car's finish!
Please note photos may vary from actual product as all our engines are custom built.
PhoenixEngine.com
21632 N 7th Ave, Suite 1, Phoenix AZ 85027
SW corner
of 7th Ave
& Deer Valley Rd,
just south of Deer Valley Airport entrance.
602 866-8044
email: phxengine@aol.com
NAVIGATION MENU |
|||