MAIN PHONE NUMBER: 602-866-8044

CHEVY 350 — 330 HP
SILVER NIGHT TURNKEY ENGINE
(This is the Chevy-25 page)

Base Pricing from:

Chevy 350 — 330 HP (2 bolt) $3895
(Engine with best vacuum, dual patterned cam.)

Chevy 350 — 330 HP (4 bolt) $4295
(Little less vacuum, single patterned cam but best sound.)

We also have a Chevy 350ci 332HP engine with a single pattern cam (a little less vacuum) for the same pricing as the above two engines.

THIS IS A LIMITED TIME SALE PRICING
The normal price of these engines is $100 more. Buy now to receive the special pricing above!

ASK ABOUT OUR ROLLER CAM UPGRADE PACKAGES!

Ask about our Fast Track Startup:
That means this engine can be Real Ready to Run OUT OF THE BOX if you choose our our Fast Track startup, which includes break in, super tuning, jetting, and more.

If you choose a Fast Track Start Up, we have special pricing right now!

Click HERE to learn more about FAST TRACK!

This is a Chevy High Performance street friendly engine in our Silver Night series. One of the best mild street engines around!

Will run on unleaded pump gas. Makes a great daily driver.

Built from one of our Dyno tested packages!
This 330 HP engine pulls 360 ft lbs torque!

This engine is a seasoned heavy duty Chevy small block. Engine will run on unleaded fuel.

SPECIAL SALE UPGRADES:
1. Ask for '86 to '95 first generation swirl vortec heads upgrade for low and mid range torque. These are the 12-bolt pattern heads (not pictured on this page). This is a FREE UPGRADE during this limited time offer! The great news is these first generation Swirl Vortec heads will also accommodate all your serpentine drive belt assemblies!

2. Ask for '96 to 2002 second generation Vortec heads (heart shaped chamber) upgrade for low, great mid range, and high end torque - an additional upgrade for $395. The second generation Vortec heads also accommodate serpentine drive belt assemblies!

Note that on both the first and second generation Vortec heads, the valve cover bolts are down the center of the valve cover, not on the outside like the Old School heads.

This Power 2 engine combination would be great in your muscle car, street, strip, hot rod, kit car, custom truck, 4X4, or Jeep.

This engine was built from one of our Dyno packages.
Your engine can also be Dyno tested for an additional charge.
Check out the Dyno testing pic in the right column! >>

Our special features include all these new parts and more:
(Be sure to scroll down for more details on parts and labor.)

• Seal Power Silvolite hypereutectic pistons.
• Comp or Howards Cam Kit 450 to 465+ lift HP.
  call for custom cam applications.
• Cam is hydraulic dual patterned high performance.
• Heavy duty roller timing chain high performance.
• Steel forged rods, nodular crank.
• Power Plus High Rise dual plane intake manifold or plain aluminum intake. Polished intake is extra.
• Call on Edelbrock Old School Torquer intake manifold upgrades!
• Edelbrock Carb 600 CFM with electric choke,
  or you may choose a Holley carburetor 600 CFM with electric choke.
• Choice of 3 HEI distributors:
  ProBillet Street is included, MSD or ProRace extra.
• Spark plug wires, spark plugs.
• PER 8" harmonic balancer, timing flag, flex plate.
• Chrome valve covers, chrome pulleys.
• Chrome timing chain cover.
• Water pump, 5 qt oil pan.
• Built from one of our Dyno tested and road proven Dyno packages. Your engine can also be Dyno tested, for an additional charge.
• Call for info on flex plate or fly wheel.
• Call for correct flex plate on automatics.
• Call for info on standard transmissions (4 or 5 speed, etc.)
• Comes complete, intake to oil pan. Some assembly may be needed.
• Fuel pump not included.
• Customer must use his own pulleys for water pump and balancer.

Please scroll down for more info on engine parts and machine work! Upgrades available include polished aluminum or chrome water pump, aluminum pulleys, 7qt (vs 5qt) oil pan and more. We can completely customize this engine to suit your needs!

Your Power 2®
ENGINE PARTS include:

• Power 2® Comp or Howards Cam Kit 450 - 465+
  (call for custom cam applications)
• Power 2® hydraulic lifters Seal Power
• Power 2® spring set, heavy duty ( 900 series spring sets)
• Power Plus High Rise dual plane intake manifold or plain aluminum intake. Polished intake is extra.
• Heavy Duty Steel Stem intake valves 1.94
• Heavy Duty Steel Stem exhaust valves 1.5
• Premium positive valve seals, polyacrylate
• Heavy Duty roller timing chain
• Controlled internal oil system (a PER exclusive!)
• Heavy duty, high volume Melling oil pump
• Heavy duty steel collar oil shaft, Melling
• Heavy duty oil pickup screen
• High quality Speed Pro SL hypereutectic pistons
• P.E.R.® Seal Power molly rings
• Brass freeze plug kit and oil gallery kit
• High quality rear main seal, double lip polyacrylate
• Fel Pro PermaTorque heavy duty gasket set
• Clevite or King main bearings, Real Tri metal, high quality
• Clevite or King rod bearings, Real Tri metal, high quality
• New rod nuts installed, rods aligned
• Cam bearings, high quality 360 Set

Your Power 2® engine
MACHINE LABOR includes:

• P.E.R. 3-angle® valve job
• Mill-matching surfaced heads
• Heavy duty steel thick wall valve guides
• Valve guides custom cut for posi-seals
• Jet vat block and magnifluxing
• Remove and replace all freeze plugs
• Remove and replace gallery plugs
• Remove and replace cam bearings
• Custom centerline boring of block
  True 90 degree V8 centerline boring
• Power hone to fit pistons and rings
• Custom crank micro polish, radius oil holes
• Rods pressed off, then heat fitted
• Rods checked for alignment
• Street balancing and blueprinting
  

FOR ANY CHANGES NEEDED, JUST CALL AND WE WILL BUILD A CUSTOM ENGINE PACKAGE FOR YOU. YOU CAN ALSO CHANGE THE COLOR, CHOOSING FROM OVER 25 DIFFERENT COLORS.

ALL OUR ENGINES ARE CUSTOM HAND BUILT:
327- 350- 383- 396- 427- 454 AND MORE!

Call to order this engine:
602-866-8044
Monday through Thursday: 8:30am - 5:00pm
Friday 08:30am - 4:00pm
Saturday: BY APPOINTMENT ONLY
Sunday: Closed
Times listed are Arizona time (-7 GMT).
Arizona does not observe Daylight Savings Time. We are on MST all year round.

DID YOU KNOW? At Phoenix Engine, every Power Engine® is CUSTOM rebuilt in our machine shop by P.E.R. professionals, from start to finish. The Power Engine® Performance Combination was developed from our over 50 years of experience on MUSCLECARS, STREET STRIPS, CUSTOM TRUCKS, 4x4s, HOT RODS, CUSTOM MODS, JEEPS, and RESTORATIONS. Established in 1971, PhoenixEngine.com has built over 200,000 quality engines to date.

Warranty and Shipping Info:

This engine has a one year written warranty. Buyer pays actual shipping costs if unable to pick up engine from our shop in Phoenix AZ. Some state freight restrictions apply. Payment due in full prior to shipping. We accept Visa, Mastercard, Discover, American Express, money orders, cashier's checks, and direct deposit. (GET A DISCOUNT WITH A DIRECT DEPOSIT!) Business or personal checks must clear prior to shipping. Arizona residents must add 8.6% sales tax.
Please call for core requirements.
         

Call PhoenixEngine.com today to order!
602-866-8044

Disclaimer: Please note that some parts are based on availability. The brand names listed above are guidelines; the exact brand name may not be available at the time we build your engine. Pricing is deemed to be correct at time of posting, but is not guaranteed. It is listed as a guideline only. Please call us for complete pricing on the engine built to your specific requirements.
These engines are built from our Dyno tested packages in our shop and road proven.
Your specific engine can be Dyno tested individually for an additional cost.
Also ask about Fast Track engine testing for your engine, which is cheaper than Dyno testing!
Please be sure to read our full Disclaimer: CLICK HERE.

7/3/24 15:34

July 3, 2024

Some of the photos below show examples of our new Holley Sniper fuel injection, and Serpentine systems.
THESE SYSTEMS ARE ON SALE NOW - CALL US FOR THE BEST PRICING ON THESE UPGRADES!

WE NOW OFFER BOTH HOLLEY SNIPER AND SERPENTINE SYSTEM UPGRADES FOR YOUR ENGINE. BOTH SYSTEMS ARE ON SALE NOW - CALL US FOR THE BEST PRICING ON THESE UPGRADES!

* Note: When we custom build your engine, you can choose from over 25 different colors or you can supply the paint to have your engine painted the same color as your car's finish!

Please note photos may vary from actual product as all our engines are custom built.