MAIN PHONE NUMBER: 602-866-8044

CHEVY 350 — 355 HP
TURNKEY ENGINE
Chevy High Performance
2 Bolt Main or 4 BOLT MAIN

*** BEST MILD STREET TURNKEY ENGINE ***

Priced from:
Chevy 350 — 350 HP (2 bolt) $3395
(Engine with best vacuum, dual patterned cam.)

Chevy 350 — 355 HP (2 bolt) $3395
(Little less vacuum, single patterned cam but best sound.)

Chevy 350 — 350 HP (4 bolt) $3795
(Best vacuum, dual patterned cam.)

Chevy 350 — 355 HP (4 bolt) $3795
(Little less vacuum, single patterned cam but best sound.)

THIS IS A LIMITED TIME SALE PRICING
The normal price of these engines is $100 more. Buy now to receive the special pricing above!

ASK ABOUT OUR ROLLER CAM UPGRADE PACKAGES!

SPECIAL SALE UPGRADES:
1. Ask for '86 to '95 first generation swirl vortec heads upgrade for low and mid range torque. These are the 12-bolt pattern heads (not pictured on this page). This is a FREE UPGRADE during this limited time offer! The great news is these first generation Swirl Vortec heads will also accommodate all your serpentine drive belt assemblies!

2. Ask for '96 to 2002 second generation Vortec heads (heart shaped chamber) upgrade for low, great mid range, and high end torque - an additional upgrade for $495. The second generation Vortec heads also accommodate serpentine drive belt assemblies!

Note that on both the first and second generation Vortec heads, the valve cover bolts are down the center of the valve cover, not on the outside like the Old School heads.

PLEASE CALL FOR MORE INFO ON PROMOTIONAL PRICING AND SALES!

Ask about our Fast Track Startup:
That means this engine can be Real Ready to Run OUT OF THE BOX if you choose our our Fast Track startup, which includes break in, super tuning, jetting, and more.

Click HERE to learn more about FAST TRACK!

If you choose to do a Fast Track Start Up, we have special pricing right now on these engines!

VIDEO: Click HERE to see our FAST TRACK startup in action on this engine!

VIDEO: This is with open headers, after the engine has been super tuned on our FAST TRACK!

CLICK HERE to see a real-time Dyno run video!

This is the best turnkey you'll find! It's an excellent street machine engine with a great Old School sound.

This Power 2 Engine Combination would be GREAT in your MUSCLECAR, Street, Hot Rod, Custom Truck, Kit Car, 4 X 4, or JEEP.

This engine was built from one of our Dyno packages!
Your engine can also be Dyno tested for an additional charge.

These engines are Seasoned Heavy Duty Chevy Small Blocks. Engine will run on unleaded fuel.
THIS ENGINE IS A GREAT DAILY DRIVER - WILL RUN ON PUMP GAS!

Special features on this engine include these new parts and more:
(Be sure to scroll down the page to see a more detailed listing.)

1. Power 2® Comp or Howards Cam Kit 470 - 480+
   Dual pattern cam for best vacuum
   (call for custom cam applications)
2. Power 2® Comp or Howards Cam Kit 480 lift
   Single pattern cam
   (best to give us a call on your needs)
3. If you request a different cam, you will need to speak with one of our expert counter men.
   
   

• Edelbrock Carb 750 CFM with electric choke.
  You can also choose a Holley 750 carburetor CFM with electric choke.
• Power Plus High Rise dual plane intake manifold
  or Edelbrock aluminum (polished intake is extra)
  or plain no-name aluminum intake (for the nostalgic look).
• Call on Edelbrock Old School Torker intake manifold upgrades!
• Choice of 3 distributors:
  ProBillet Street HEI distributor is included,
  MSD 2 pack or MSD 6AL 3 pack is extra.
• Spark plug wires, spark plugs.
• P.E.R. 8" harmonic balancer, timing flag, flex plate.
• Chrome valve covers, two chrome pulleys.
• Chrome 14" air cleaner included.
• Chrome timing chain cover.
• Water pump, 5 qt oil pan.
• Built from one of our Dyno tested and road proven Dyno packages. Your engine can be Dyno tested as well, for an additional charge.
• Call for info on flex plate or fly wheel.
  Call for correct flex plate on automatics.
• Call for info on standard transmissions (4 or 5 speed, etc.)
  
• Some assembly may be needed.
• Fuel pump not included.
• Customer must use his own pulleys for water pump and balancer.

Please scroll down for more info on engine parts
and machine work!

Ask about our Fast Track Startup Package!

What comes with your Power 2® engine?

Here's a listing of the parts and machine labor for your Power 2® engine from PhoenixEngine.com.

Your Power 2®
ENGINE PARTS include:

1. Power 2 Comp or Howards Cam Kit 470 - 480+
   Dual pattern cam for best vacuum
   (call for custom cam applications)
2. Power 2 Comp or Howards Cam Kit 480 lift
   Single pattern cam
   (best to give us a call on your needs)
3. If you request a different cam, you will need to speak with one of our expert counter men.
   
   

• Power 2 Comp hydraulic lifters
• Power 2 spring set, heavy duty ( 900 series spring sets)
• Power Plus High Rise dual plane intake manifold (or Edelbrock aluminum, or plain no-name aluminum intake for the nostalgic look.) Polished intake is extra.
• Heavy Duty Steel Stem intake valves 1.94
• Heavy Duty Steel Stem exhaust valves 1.5
• Premium positive valve seals, polyacrylate
• Heavy Duty roller timing chain
• Controlled internal oil system (a PER exclusive!)
• Heavy duty, high volume Melling oil pump
• Heavy duty steel collar oil shaft, Melling
• Heavy duty oil pickup screen
• High performance Speed Pro pistons,
  type: hypereutectic pistons by Seal Power
• P.E.R.® Speed Pro plasma molly rings
• Brass freeze plug kit and oil gallery kit
• High quality rear main seal, double lip polyacrylate
• Fel Pro PermaTorque heavy duty gasket set
• Clevite main bearings, Real Tri metal, high quality
• Clevite rod bearings, Real Tri metal, high quality
• New rod nuts installed, rods aligned
08/03/2024EndDate -->60 Set

• P.E.R. 4-angle® valve job
• Mill-matching surfaced heads
• Heavy duty steel thick wall valve guides
• Valve guides custom cut for posi-seals
• Jet vat block and magnifluxing
• Remove and replace all freeze plugs
• Remove and replace gallery plugs
• Remove and replace cam bearings
• Custom centerline boring of block
  True 90 degree V8 centerline boring
• Power hone to fit pistons and rings
• Custom crank micro polish, radius oil holes
• Rods pressed off, then heat fitted
• Rods checked for alignment
• Street Balancing and blueprinting
  

NOTES:
YOU CAN CUSTOM ORDER HEADERS TO FIT YOUR APPLICATION.
YOU CAN ORDER THIS ENGINE WITH AN OPTIONAL 5 QT CHROME OIL PAN OR A 7 QT OIL PAN FOR AN EXTRA CHARGE. ~~ FOR ANY CHANGES NEEDED, JUST CALL AND WE WILL BUILD A CUSTOM ENGINE PACKAGE FOR YOU FROM 375 HORSEPOWER TO 714 HORSEPOWER. ~~ YOU CAN ALSO CHANGE THE COLOR, CHOOSING FROM OVER 25 DIFFERENT COLORS.

ALL OUR ENGINES ARE CUSTOM HAND BUILT:
327 - 350 - 383 - 396 - 427 - 454

Call to order this engine:
602-866-8044
Monday through Thursday: 8:30am - 5:00pm
Friday: 08:30am - 4:00pm
Saturday: BY APPOINTMENT ONLY
Sunday: Closed
Times listed are Arizona time (-7 GMT).
Arizona does not observe Daylight Savings Time. We are on MST all year round.

DID YOU KNOW? At Phoenix Engine, every Power Engine® is CUSTOM rebuilt in our machine shop by P.E.R. professionals, from start to finish. The Power Engine® Performance Combination was developed from our over 50 years of experience on MUSCLECARS, STREET STRIPS, CUSTOM TRUCKS, 4x4s, HOT RODS, CUSTOM MODS, JEEPS, and RESTORATIONS. Established in 1971, PhoenixEngine.com has built over 200,000 quality engines to date.

Warranty and Shipping Info:

This engine has a one year written warranty. Buyer pays actual shipping costs if unable to pick up engine from our shop in Phoenix AZ. Some state freight restrictions apply. Payment due in full prior to shipping. We accept Visa, Mastercard, Discover, American Express, money orders, cashier's checks, and direct deposit. (GET A DISCOUNT WITH A DIRECT DEPOSIT!) Business or personal checks must clear prior to shipping. Arizona residents must add 8.6% sales tax.
Please call for core requirements.
         

Call PhoenixEngine.com today to order!
602-866-8044

Disclaimer: Please note that some parts are based on availability. The brand names listed above are guidelines; the exact brand name may not be available at the time we build your engine. Pricing is deemed to be correct at time of posting, but is not guaranteed. It is listed as a guideline only. Please call us for complete pricing on the engine built to your specific requirements.
These engines are built from our Dyno tested packages in our shop and road proven.
Your specific engine can be Dyno tested individually for an additional cost.
Also ask about Fast Track engine testing for your engine, which is cheaper than Dyno testing!
Please be sure to read our full Disclaimer: CLICK HERE.

8/3/24 13:41

WE NOW OFFER HOLLEY SNIPER FUEL INJECTION SYSTEM AND SERPENTINE SYSTEM UPGRADES FOR YOUR ENGINE. CALL US FOR SALE PRICING ON THESE UPGRADES!

Chevy 350ci Turnkey Engine. Scroll down for more photos. Please note that some of the photos below show our optional Holley Sniper Fuel Injection and Serpentine System upgrades.

8/3/24 13:418/3/240" />

* Note: When we custom build your engine, you can choose from over 25 different colors or you can supply the paint to have your engine painted the same color as your car's finish!

Please note photos may vary from actual product as all our engines are custom built.